Name: Separating funnel cylindrical glass stopper 250mL
SKU: 315462
Price: 16.05 EUR
Availability: InStock

Separating funnel cylindrical glass stopper 250mL

Separating funnel cylindrical glass stopper, with stopcock

The Separating Funnel is a chemistry laboratory utensil used to separate liquids of different densities. It is an opioid drip funnel whose stenosis includes a valve. By opening the valve, the heavier liquid is allowed to flow downwards, remaining the lightest in the hopper. An example of a mixture that can be separated in a separating bottle is the water-oil mixture.

A separatory funnel, also known as a separation funnel, separating funnel, or colloquially sep Funnel and fractionating Funnel. It is a piece of laboratory glassware used in liquid-liquid extractions. It is used for separation (partition) the components of a mixture into two immiscible solvent phases of different densities. Typically, one of the phases will be aqueous, and the other a lipophilic organic solvent such as ether. For examle MTBE, dichloromethane, chloroform, or ethyl acetate. All of these solvents form a clear delineation between the two liquids. The more dense liquid, typically the aqueous phase unless the organic phase is halogenated, sinks and can be drained out through a valve away from the less dense liquid. Which remains in the separatory funnel.

Separating funnel cylindrical glass stopper 250mL

The separatory funnel relies on the concept of “like dissolves like”, which describes the ability of polar solvents to dissolve polar solutes and non-polar solvents to dissolve non-polar solutes. When the separatory funnel is agitated, each solute migrates to the solvent (also referred to as “phase”) in which it is more soluble.

The solvents normally do not form a unified solution together because they are immiscible. When the funnel is kept stationary after agitation, the liquids form distinct physical layers – lower density liquids will stay above higher density liquids. A mixture of solutes is thus separated into two physically separate solutions, each enriched in different solutes.

The valve may be opened after the two phases separate to allow the bottom layer to escape the separator funnel. The top layer may be retained in the separatory funnel for further extractions with additional batches of solvent or drained out into a separate vessel for other uses. If it is desired to retain the bottom layer in the separatory funnel for further extractions, both layers are taken out separately, and then the former bottom layer is returned to the separatory funnel.

Safety

The largest risk when using a separatory funnel is that of pressure build-up. Pressure accumulates during mixing if a gas evolving reaction or physical change occurs. This problem can be easily handled by simply opening the stopper at the top of the funnel routinely while mixing. More standard procedure is to invert the separatory funnel upside down, and open the tap to release the pressure. This should be done with the tip of the funnel pointed away from the body.

https://en.wikipedia.org/wiki/Separatory_funnel