Tetrahydrofuran (THF) 1Lt, analytical grade
Tetrahydrofuran (THF), or oxolane, is an organic compound with the formula (CH2)4O. The compound is classified as heterocyclic compound, specifically a cyclic ether. It is a colorless, water-miscible organic liquid with low viscosity. It is mainly used as a precursor to polymers. Being polar and having a wide liquid range, THF is a versatile solvent.
Properties
Chemical formula: C4H8O
Molecular weight: 72.107 g·mol−1
Boiling point: 66 °C
Melting point: −108.4 °C
Density: 0.8876 g/cm3 at 20 °C
Chemical structure
Safety
Description
As a solvent
The other main application of THF is as an industrial solvent for polyvinyl chloride (PVC) and in varnishes. It is an aprotic solvent with a dielectric constant of 7.6. It is a moderately polar solvent and can dissolve a wide range of nonpolar and polar chemical compounds. THF is water-miscible and can form solid clathrate hydrate structures with water at low temperatures.
THF has been explored as a miscible co-solvent in aqueous solution to aid in the liquefaction and delignification of plant lignocellulosic biomass for production of renewable platform chemicals and sugars as potential precursors to biofuels. Aqueous THF augments the hydrolysis of glycans from biomass and dissolves the majority of biomass lignin making it a suitable solvent for biomass pretreatment.
THF is often used in polymer science. For example, it can be used to dissolve polymers prior to determining their molecular mass using gel permeation chromatography. THF dissolves PVC as well, and thus it is the main ingredient in PVC adhesives. It can be used to liquefy old PVC cement and is often used industrially to degrease metal parts.
THF is used as a component in mobile phases for reversed-phase liquid chromatography. It has a greater elution strength than methanol or acetonitrile, but is less commonly used than these solvents.
THF is used as a solvent in 3D printing when using PLA plastics. It can be used to clean clogged 3D printer parts, as well as when finishing prints to remove extruder lines and add a shine to the finished product. Recently THF is used as co-solvent for lithium metal batteries, helping to stablize the metal anode.
Laboratory use
In the laboratory, THF is a popular solvent when its water miscibility is not an issue. It is more basic than diethyl ether and forms stronger complexes with Li+, Mg2+, and boranes. It is a popular solvent for hydroboration reactions and for organometallic compounds such as organolithium and Grignard reagents. Thus, while diethyl ether remains the solvent of choice for some reactions (e.g., Grignard reactions), THF fills that role in many others, where strong coordination is desirable and the precise properties of ethereal solvents such as these (alone and in mixtures and at various temperatures) allows fine-tuning modern chemical reactions.
Commercial THF contains substantial water that must be removed for sensitive operations, e.g. those involving organometallic compounds. Although THF is traditionally dried by distillation from an aggressive desiccant, molecular sieves are superior.
In terms of scale, the most important reaction of chloroform is with hydrogen fluoride to give monochlorodifluoromethane (CFC-22), a precursor in the production of polytetrafluoroethylene (Teflon):
- CHCl3 + 2 HF → CHClF2 + 2 HCl
The reaction is conducted in the presence of a catalytic amount of mixed antimony halides. Chlorodifluoromethane is then converted into tetrafluoroethylene, the main precursor to Teflon. Before the Montreal Protocol, chlorodifluoromethane (designated as R-22) was also a popular refrigerant.
Solvent
The hydrogen attached to carbon in chloroform participates in hydrogen bonding. Worldwide, chloroform is also used in pesticide formulations, as a solvent for fats, oils, rubber, alkaloids, waxes, gutta-percha, and resins, as a cleansing agent, grain fumigant, in fire extinguishers, and in the rubber industry. CDCl3 is a common solvent used in NMR spectroscopy.
Reagent
As a reagent, chloroform serves as a source of the dichlorocarbene :CCl2 group. It reacts with aqueous sodium hydroxide usually in the presence of a phase transfer catalyst to produce dichlorocarbene, :CCl2. This reagent effects ortho-formylation of activated aromatic rings such as phenols, producing aryl aldehydes in a reaction known as the Reimer–Tiemann reaction. Alternatively, the carbene can be trapped by an alkene to form a cyclopropane derivative. In the Kharasch addition, chloroform forms the CHCl2 free radical in addition to alkenes.
Anesthetic
The anaesthetic qualities of chloroform were first described in 1842 in a thesis by Robert Mortimer Glover, which won the Gold Medal of the Harveian Society for that year. Glover also undertook practical experiments on dogs to prove his theories. Glover further refined his theories and presented them in the thesis for his doctorate at the University of Edinburgh in the summer of 1847. The Scottish obstetrician James Young Simpson was one of the persons required to read the thesis, but later claimed to have never read the thesis and to have come to his conclusions independently.
On 4 November 1847, Simpson first used the anesthetic qualities of chloroform on a pair of humans: two guests at his dinner party. This was done as entertainment and not as a medical procedure.
A few days later, during the course of a dental procedure in Edinburgh, Francis Brodie Imlach became the first person to use chloroform on a patient in a clinical context.