Gyro sensor 1 axis 300 ο /sec

16,18 € (πλέον ΦΠΑ)


Κωδικός: 709165 Κατηγορία:

Περιγραφή Προϊόντος

This is a breakout board for the ST’s single-axis LY530ALH gyro. The LY530ALH measures angular velocity along the yaw axis with a full scale of ±300°/s. Two different analog outputs are provided for the z-axis – one 1x amplified and the other 4x amplified.

A regulated voltage between 2.7 and 3.6VDC should be supplied to the power pins. We have the filtering circuits all set up, so you&apos ll just need to connect the outputs to an ADC, and you&apos re ready to go.

This breakout board includes the gyro and all necessary filtering capacitors as shown. The 1x and 4x amplified outputs of both axes are connected to the 0.1&quot pitch headers, along with the power-down, self-test, high-pass filter reset, and power pins.

We put the LY530ALH on our LPY5xxx gyro breakout boards. Don&apos t be tricked by the pin-out, the x-axis outputs will not work.

Not sure which gyro is right for you? Our Accelerometer and Gyro Buying Guide might help!

Note: Some users have found that the high pass filter on this breakout board causes the output to be incapable of being integrated. A revision is coming that will have R5 and R8 removed and replacing C1 and C2 with a jumper.


2.7 to 3.6VDC power supply

Yaw rotation sensing

1x and 4x amplified outputs

Low power consumption

All necessary filtering components included

Access to power-down, self-test, and high-pass filter reset pins

Dimensions: 0.6″x0.7″



Eagle Files

LY530ALH Datasheet